Powerwerks Tower PA Speaker with Bluetooth® ~ 50W
SKU: PW505BT
This lightweight full range personal PA system features two 5" Eminence® speakers with a high frequency driver, multiple inputs, phanto power, and balanced XLR outputs.
Specifications
Output Power
50W
Accepted Inputs
Channels 1 and 2: Mic XLR, Line level 1/4" Un-balanced
Hum and Noise
-65 dB: Residual noise, all level controls at 0% (minimum)
-48 dB Nominal system noise, all level controls at 50%
System Gain (Measurements made at 1 kHz)
+70 dB: Mic to speaker output (Channel 1 and 2)
+56 dB: Line to speaker output (Channel 1 and 2)
+42 dB AUX IN to speaker output
Channel EQ (High, low)
4 kHz and above, 800 Hz and below
Powerlink (In and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use. Linking two PW505BT units together
Subwoofer Out
Line out, 200 Hz-150 Hz
Phantom Power
+15, Mic inputs (Channel 1 and 2)
Power Requirements
Europe: 230VAC/50 Hz, 80 W Nominal
UK: 230VAC/50 Hz, 80 W Nominal
Speakers
2 x 5", 25 W 16 Ohm each
Horn
3.5" piezo driver
Power Capacity
50 W, RMS
Frequency Response
60 Hz - 20 kHz, Full range (subwoofer jack not used)
150 Hz - 20 kHz, Crossover active ( 1/4" mono plug in subwoofer jack )
Nominal Impedance
Not designed for external speakers
Bluetooth® Module Features
Bluetooth® 3.0+EDR compliant Typical +2 dBm Class 2 output power Audio DAC 94 dB SNR A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
7.2" W x 18.8" H x 7.3" D
192mm W x 478mm H x 185mm D
Weight
16 lbs
7.2 kg
Specifications
Output Power
50W
Accepted Inputs
Channels 1 and 2: Mic XLR, Line level 1/4" Un-balanced
Hum and Noise
-65 dB: Residual noise, all level controls at 0% (minimum)
-48 dB Nominal system noise, all level controls at 50%
System Gain (Measurements made at 1 kHz)
+70 dB: Mic to speaker output (Channel 1 and 2)
+56 dB: Line to speaker output (Channel 1 and 2)
+42 dB AUX IN to speaker output
Channel EQ (High, low)
4 kHz and above, 800 Hz and below
Powerlink (In and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use. Linking two PW505BT units together
Subwoofer Out
Line out, 200 Hz-150 Hz
Phantom Power
+15, Mic inputs (Channel 1 and 2)
Power Requirements
Europe: 230VAC/50 Hz, 80 W Nominal
UK: 230VAC/50 Hz, 80 W Nominal
Speakers
2 x 5", 25 W 16 Ohm each
Horn
3.5" piezo driver
Power Capacity
50 W, RMS
Frequency Response
60 Hz - 20 kHz, Full range (subwoofer jack not used)
150 Hz - 20 kHz, Crossover active ( 1/4" mono plug in subwoofer jack )
Nominal Impedance
Not designed for external speakers
Bluetooth® Module Features
Bluetooth® 3.0+EDR compliant Typical +2 dBm Class 2 output power Audio DAC 94 dB SNR A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
7.2" W x 18.8" H x 7.3" D
192mm W x 478mm H x 185mm D
Weight
16 lbs
7.2 kg
More from Powerwerks
Recently viewed
